|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SM16LC03C-6 8700 E. Thomas Road Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503 thru SM16LC24C-6 TVSarrayTM Series TM DESCRIPTION (300 watt) This 16 pin 6 line Low Capacitance Bidirectional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and effects of secondary lighting. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a peak power of 300 watts for an 8/20 sec pulse and are designed to protect 3.0/3.3 volt components such as DRAM's, SRAM's, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 volts. FEATURES * * * * Protects 3.0/3.3 up through 24V Components Protects 6 lines Bi-directional Provides electrically isolated protection SO-16 Packaging MECHANICAL * * * * Molded SO-16 Surface Mount Weight: 2.5 grams (approximate) Body Marked with Logo, and device number Pin #1 defined by DOT on top of package MAXIMUM RATINGS * * * * Operating Temperatures: -550C to +1500C Storage Temperature: -550C to +1500C Peak Pulse Power: 300 Watts (8/20 sec, Figure 1) Pulse Repetition Rate: <.01% PACKAGING * * * Tape & Reel EIA Standard 481-1-A 13 inch reel 2,500 pieces (OPTIONAL) Carrier tubes 50 pieces per (STANDARD) ELECTRICAL CHARACTERISTICS@ 250C Unless otherwise specified STAND OFF VOLTAGE VWM VOLTS MAX SM16LC03C-6 SM16LC05C-6 SM16LC12C-6 SM16LC15C-6 SM16LC24C-6 MAL MAM MAN MAO MAP 3.3 5.0 12 15 24 BREAKDOWN VOLTAGE VBR @1 mA VOLTS MIN 4 6 13.3 16.7 26.7 CLAMPING VOLTAGE VC @ 1 Amp (FIGURE 2) VOLTS MAX 7 9.8 19 24 43 CLAMPING VOLTAGE VC @ 5 Amp (FIGURE 2) VOLTS MAX 9 11 24 30 55 LEAKAGE CURRENT ID @ VWM A MAX 200 100 1 1 1 CAPACITANCE (f=1 MHz) @0V C pF TYP 25 25 25 25 25 TEMPERATURE COEFFICIENT OF VBR aVBR mV/C MAX -3 1 8 11 28 PART NUMBER DEVICE MARKING NOTE: Transient Voltage Suppression (TVS) product is normally selected based on its stand off voltage VWM. Product selected voltage should be equal to or greater than the continuous peak operating voltage of the circuit to be protected. Application: The SM16LCXXC-6 product is designed for transient voltage suppression protection of components at the board level. It is an ideal product to be used for protection of I/O Transceivers. MSC0979.PDF ISO 9001 CERTIFIED REV D 8/25/99 SM16LC03C-6 thru SM16LC24C-6 WAVE FORMS Ipp -- Peak Pulse Current -- % Ipp 100 Peak Value -- Ipp 8 X 20 Waveform 50 Half-Value -- Ipp 2 0 0 t 10 td 20 30 t -- Time in microsec FIGURE 1 Peak Pulse Power Vs Pulse Time FIGURE 2 Pulse Wave Form MOUNTING PAD SO-16 CIRCUIT DIAGRAM SO-16 PACKAGE A INCHES DIM MIN 0.358 0.150 0.053 0.011 0.016 0.050 BSC 0.006 0.004 0.189 0.228 0.010 0.008 0.206 0.244 MAX 0.398 0.158 0.069 0.021 0.050 A B C D F MILLIMETERS MIN 9.09 3.81 1.35 0.28 0.41 1.27 BSC 0.15 0.10 4.80 5.79 0.25 0.20 5.23 6.19 MAX 10.10 4.01 1.75 0.53 1.27 B P G G D C K J L J K L P F MSC0979.PDF ISO 9001 CERTIFIED REV D 8/25/99 |
Price & Availability of SM16LC03C-6 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |